6311

6311

Description

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved .
  • Ph/ORP/temp. measurement & control
  • Display pH electrode efficiency
  • User selectable ATC element: 3k balco, 10k, and pt-1000
  • Reversible & isolated 4~20ma output
  • RS-485 output
  • Bumpless calibration
  • Graphic LCD dispaly,128 x 64with backlight
  • Membrane switch with audio feedback
  • Auto temp. compensation
  • High 50/60 hz noise rejection
  • Pipe/wall/panel mounting
  • 1/4 DIN watertight enclosure
  • One programmable relay for temp.
  • CE approved
  • Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output

Specifications

  •   Range Resolution Accuracy
    pH -2.00 to 16.00 0.01pH ± 0.1 % pH ± 1 LSD
    ORP(Absolute) -2500 to 2500mV 1mV ± 0.1 % mV
    ORP(Relative) -6499 to 6499mV 1mV ± 0.1 % mV
    Temp. -10.0 to 120 °C 0.1°C ± 0.3°C
  • pH

    • Temperature compensation range: -10.0 to 120.0 °C
    • Buffer recognition: 4.01,7, 10.01 / 4.00,6.86, 9.18
    • Buffer temperature range: 0 to 60.0 °C
    • Electrode slope compensation: ±30% of ideal slope
    • Electrode offset compensation: ±100 mV
    • Input impedance: Greater than 10 exp(13) ohms
    • Calibration auto end point sensing: Yes

    Output Relays

    • pH or ORP: 4programmable for pH or orp
    • Temperature: 1programmable, manual relay
    • Control type: On/off
    • Relay output (resistive load only): 5amps at 115 VAC 2.5 amps at 230 VAC
    • Relay set point hysteresis: User programmable

    Current Output

    • Type: Isolated 4 to 20 mA
    • Range: Selectable zero, & span
    • Accuracy: ±0.02mA
    • Isolated voltage: 500 VDC
    • Maximum load: 500 w

    General

    • ATC sensor: 3k balco, 10k, and pt-1000, selectable
    • Security protection: 4digit password
    • Keypad: Audio feedbackup
    • Communication: RS-485
    • Pre-amplifier voltage: ±5 VDC,20mA max output
    • Power source: 115/230 VAC, 50/60hz
    • Dimensions: 1/4 DIN, depth 148mm
    • Weight: 940 gm

Share this product

Featured Products

6311

pH & ORP analyzer,1/4 DIN panel mount IP-65 case.

6810

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout.

618N

VisionPlus pH618N is the most advanced pH tester on the market, with IP67 body, 50 data point storage, menu driven operation and replaceable electrode module.

630

VisionPlus pH630 is an IP67 rated pH tester with temperature readout.

EC330

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout.

619

VisionPlus pH619 is an IP67 rated pH tester with graphical LCD display and electrode efficiency display, menu driven operation and replaceable electrode module.

EC331

Jenco EC331 is an easy to use, IP67 rated conductivity tester with resistivity and temperature readouts.

6175

Next generation of pH benchtop meter with mV and temperature readouts, high mV resoution, and large LCD.